• Displays % relative humidity, temperature, dew-point, wetbulb
• 100% interchangeable Hygroclip probes
• Wide range of interchangeable probe options to suit every application
• Single point digital probe adjustment
• Hygroflex transmitter interface(display only)
• Technical Data
• Range: 0.....100%rh, -50......+200 deg.C(Probe dependant)
• Diplay: 4 line alphanumeric LCD
• Resolution: 0.1%rh,0.1deg.C, 0.01 calculated values
• range(electronics): 0....99%rh, -10....+60deg.C
• system accuracy at 23deg.C: +/-1.5%rh, +/-0.3K
• Reproducibility: <0.5%rh, 0.1deg.C
• Long Term Stability: 1%rh/year
• Response time: < 15 seconds
• Input Signal: 1(digital)
• housing: ABS 230 x 80 x 30mm

Click Here for Hygropalm Data Sheet

• Autonomous data logger for Hygroclip probes
• Interchangeable proble modules, no calibration
• Precise measurement of %rh and Deg.C
• Robust IP65 ABS housing
• 10,000 value memory
• Validated HW3 software
• Programmable measurement interval 15s to 2 hours
• Logging upto 416 days
• Start/stop memory loop
• User replacemable battery
• Useful range of accessories
• Technical Data
• Range: 0..100% rh; -50..200deg.C(probe dependant), resolution 0.1
• Range(Electronics): -20..+70deg.C with Lithium batteries,
  -10..+50deg.C with Alkaline batteries
• System accuracy: +/-1.5%rh, +/-0.3K
• Output Signal: RS232
• Long Term Stability: < 1%rh per year
• Reprducibility: <0.5%rh, <0.1deg.C
• Response time: < 15 seconds
• Memory Capacity(EEPROM): 10,000 values (5000 times %rh % deg.C)
• Housing: IP65, ABS, 230 x 80 x 30mm

Click Here for Hygrolog Data Sheet

• All the features of Hylgrolog
• Intergrated LC display
• Alarm indicators
• Memory status indicator
• Battery status indicator
• Technical Data
• Range: 0..100% rh; -50..200deg.C(probe dependant), resolution 0.1
• Range(Electronics):-10....+50deg.C
• System accuracy: +/-1.5%rh, +/-0.3K
• Output Signal: RS232
• Long Term Stability: < 1%rh per year
• Reprducibility: <0.5%rh, <0.1deg.C
• Response time: < 15 seconds
• Memory Capacity(EEPROM): 10,000 values (5000 times %rh % deg.C)
• Housing: IP65, ABS, 230 x 80 x 30mm, intergrated LC display

Click Here for Hygrolog D Data Sheet

• Integrated or Interchangable Probe
• Integrated Display (optional)
• Alarm Function
• Easy to use by keypad or software
• compliance with requirements for electronic records and signatures 21CFR part II, apendix 11
• Interchangeable complact flash card memory for virtually limitless number of measurement values
• Probe adjustable directly in logger
• Docking station for extended option (Including connection to PC)
• Networkable

Click Here for Hygrolog NT Data Sheet

• Industrial transmitter of rhumidity and temperature with digital probe concept
• Wide range of probe configurations
• Reduced service costs thanks to probe interchangeablility
• Calibration on-site is eliminated
• User re-scaleable uptput signals
• Optional siplay with keypad
• Measurement in Ex zones
• Excellent long term stability
• Precise, condensation resistant sensor - Hygromer C94
• Test connection for Hygropalm reference instrument
• Technical Data (including Hygroclip Industrial Probge)
• Probe type: Hygroclip Industrial Series
• Probe inputs: 1 digital or analogue,0..2.5V,10bit A/D, Supply 15VDC,max. 10mA
• Measurement range: 0...100%rh,-50...+200deg.C(probe dependant)
• Range(electronics): 0...100%rh(non condensing)-40...+60deg.C, with display -30...+60deg.C
• Sensors: Hygromer C94(%rh), Pt100 1/3 DIN (temperature)
• Accuracy at 23deg.C: +/-1.5%rh(0...100%rh), +/-0.3K(+/-1%rh, +/-0.2K with special calibration)
• Reproducibility: <0.5%rh/0.1deg.C
• Long term stability: <1%rh/year typical, <0,1K/year
• Adjustment Points: 1 pont(%rh,deg.C) or 4 point (%rh)/ 2 point(deg.C),(only with display/keypad Option)
• Analogue outputs: Factory confirgured to 4...20mA
• Analogue output options: 0...1V, 0...5V,0...10V,0...20mA or 4...20mA(jumper configurable)
• Display/Keypad(option): 3 line LC display, membrane keypad
• Display Resolution: 0.1%rh, 0.1 deg.C
• Housing: IP65 ABS, Dimensions: 207 x 150 x 58mm(metal housing optional)

• Industrial transmitter of rhumidity and temperature with digital probe concept
• Wide range of probe configurations
• Reduced service costs thanks to probe interchangeablility
• Calibration on-site is eliminated
• Calculation of different humidoity parameters; dewpoint, mixing, ratio, ect
• Software for adjustment/calibration of probes and instruments configuration
• Optional siplay with keypad
• Measurement in Ex zones
• Excellent long term stability
• Precise, condensation resistant sensor - Hygromer C94
• Test connection for Hygropalm reference instrument
• Technical Data (including Hygroclip Industrial Probge)
• Probe type: Hygroclip Industrial Series
• Probe inputs: 1 digital or analogue,0..2.5V,10bit A/D, Supply 15VDC,max. 10mA
• Measurement range: 0...100%rh,-50...+200deg.C(probe dependant)
• Range(electronics): 0...100%rh(non condensing)-40...+60deg.C, with display -30...+60deg.C
• Sensors: Hygromer C94(%rh), Pt100 1/3 DIN (temperature)
• Accuracy at 23deg.C: +/-1.5%rh(0...100%rh), +/-0.3K(+/-1%rh, +/-0.2K with special calibration)
• Reproducibility: <0.5%rh/0.1deg.C
• Long term stability: <1%rh/year typical, <0,1K/year
• Adjustment Points: 1 pont(%rh,deg.C) or 4 point (%rh)/ 2 point(deg.C),(only with display/keypad option or via PC PS232 interface)
• Digital output: RS232/RS485, software configuration(RS232 Master,RS485 Slave)
• Display/Keypad(option): 3 line LC display, membrane keypad
• Display Resolution: 0.1%rh, 0.1 deg.C
• Housing: IP65 ABS, Dimensions: 207 x 150 x 58mm(metal housing optional)

Click Here for Hygroflex 2 Data Sheet

• Industrial transmitter of rhumidity and temperature with digital probe concept
• Wide range of probe configurations
• Reduced service costs thanks to probe interchangeablility
• Calibration on-site is eliminated
• Calculation of different humidoity parameters; dewpoint, mixing, ratio, ect
• Software for adjustment/calibration of probes and instruments configuration
• Optional siplay with keypad
• Measurement in Ex zones
• Excellent long term stability
• Precise, condensation resistant sensor - Hygromer C94
• Test connection for Hygropalm reference instrument
• Technical Data (including Hygroclip Industrial Probge)
• Probe type: Hygroclip Industrial Series
• Probe inputs: 1 digital or analogue,0..2.5V,10bit A/D, Supply 15VDC,max. 10mA
• Measurement range: 0...100%rh,-50...+200deg.C(probe dependant)
• Range(electronics): 0...100%rh(non condensing)-40...+60deg.C, with display -30...+60deg.C
• Sensors: Hygromer C94(%rh), Pt100 1/3 DIN (temperature)
• Accuracy at 23deg.C: +/-1.5%rh(0...100%rh), +/-0.3K
• Reproducibility: <0.5%rh/0.1deg.C
• Long term stability: <1%rh/year typical, <0,1K/year
• Adjustment Points: 1 pont(%rh,deg.C) or 4 point (%rh)/ 2 point(deg.C),(only with display/keypad option or via PC PS232 interface)
• Analogue Outputs: Factory configuraed to 4...20mA
• Analogue output options: 0...1V, 0...5V,0...10V,0...20mA or 4...20mA(jumper configurable)
• Digital output: RS232/RS485, software configuration(RS232 Master,RS485 Slave)
• Display/Keypad(option): 3 line LC display, membrane keypad
• Display Resolution: 0.1%rh, 0.1 deg.C
• Housing: IP65 ABS, Dimensions: 207 x 150 x 58mm(metal housing optional)

Click Here for Hygroflex 3 Data Sheet

• Precise & stable %rh & Temperature measurement
• Specially designed for outdoor & meteorological measurements
• Condensation resistant sensor
• 0...1 volt output signal(MP100) low power consumption
• Cable length compensation up to 100m on vlotage output versions
• 4...20mA output options (MP400)
• Proven in roadside & airport applications
• Over 30,000 sold
• Technical Data
• Humidity sensor: Hygromer C94
• Temperature Sensor: Pt100/A
• Range: 0...100%rh, -40...+60deg.C
• Accuracy @ 23deg.C: +/-1.5%rh, +/-0.3K
• Long term stability: <1%rh, 0.1K per year typical
• Response time: <15 seconds
• Output signal:
• MP106A:0...1V = 0...100%rh,deg.C 4 wire Pt100 direct
• MP103A:0...1V + 0...100%rh, -40...+60deg.C
• MP408A:4...20mA + 0...100%rh, -40...+60deg.C
• Output load: MP106A/MP103A:min1000Ohm, MP408A: max 500Ohm
• Power Supply: MP106A/MP103A:4.8...30VDC, 3.5mA(3/4wire), 6mA(5wire), MP408A:4.8...30VDC,50mA
• Adjustment: Potentiometer,35,80%rh,Hmin
• Sensor protection: Wire mesh filter
• Mechanical: White delrin probe with IP65 male connector
• MP106A/MP103A 250x25mm(diameter)
• MP408A 260x25mm(diameter)

Click Here for MP100A/400A Data Sheet

Pryde Measurement Pty. Ltd.,
ACN 112 029 777
National Customer Service - Free Call: 1800-688-211