The Series 225 Thru-Bore Encoder is low cost and available in both single channel (225A) and quadrature (225Q) models.

The Model 225 is ideal for applications requiring motor speed control or tachometer feedback, and fits directly on a motor shaft for easy mounting.

Click Here for Series 225 Data Sheet

The Series 260 low-profile 30mm package design makes it a perfect solution for many machine and motor applications, and features a complete through-shaft design.

The Series 260 and its integral bearing-set provide for stable and consistent operation, without concerns for axial or radial shaft runout. The standard 100° C temperature capability allows servo motors to operate at higher power outputs and duty cycles.

Click Here for Series 260 Data Sheet

The Series 700 encoder has been designed specifically for industrial applications requiring a rugged and reliable unit, sealed against dust, oil vapour and moisture.

This encoder employs well-proven circuitry, designed to minimize the effects of LED ageing.

Click Here for Series 700 Data Sheet

The Series 702 encoder is a heavy duty, extremely rugged and reliable, yet compact encoder which conforms to the industry standard ‘Size 2’ 50mm/2” configuration.

The double shielded bearings are rated to 120 N (Max) axial and radial loading to ensure a long operating life in the harshest of applications. When fitted with a shaft seal and PG9 cable gland with flying lead, this device meets a protection level of IP65.

Higher resolution options are now available to 30,000 PPR.

Click Here for Series 702 Data Sheet

This very rugged size 25 encoder has been designed to suit a wide variety of industrial applications, and may be specified in various output options, from 0001 to 1600 PPR (see Table C in the PPR PDF). Encoder 730/1 is a single channel, 730/2 is quadrature and 730/3 is single + marker.

A stainless steel version is available at a modest surcharge. This version is designed for hostile environments or food applications. It is protected to IP66, and is configured with 2 metres of flying lead. Please call the sales office for details.

Click Here for Series 730 Data Sheet

Due to some major technology enhancements, the 735 encoder is now available in four resolution ranges, from 0001 PPR through to 30,000 PPR. With models 735/2 through 735/4, which use advanced circuitry, it is now possible to provide selected resolutions up to 30,000 PPR.

Please note, that within the higher resolution bands, the edge separation specifications reduce minimally, to 50oe.

A stainless steel version is available at a modest surcharge. This version is designed for hostile environments or food applications. It is protected to IP66, and is configured with 2 metres of flying lead. Please call the sales office for details.

Click Here for Series 735 Data Sheet

A heavy-duty encoder, designed to equate in form, fit and function to the widely used “90mm Ø with 12mm Ø shaft” device. It is available with all of the popular output circuits and channel configurations.

The bearings are double sealed to give prolonged service. The resolution may be selected from available PPRs between 0001 and 1600 PPR. This unit is also available with a “444” type tacho flange. Encoder 740/1 is a single channel; 740/2 is quadrature; and 740/3 is single + marker.

Click Here for Series 740 Data Sheet

Due to some major technology enhancements, the 745 encoder is now available in four resolution ranges, from 0001 PPR through to 30,000 PPR. With models 745/2 through 745/4, which use advanced circuitry, it is now possible to provide selected resolutions up to 30,000 PPR.

Please note, that within the higher resolution bands, the edge separation specifications reduce minimally, to 50oe.

Click Here for Series 745 Data Sheet

The Series 755 encoder is ideal for applications requiring a miniature, high precision, low cost encoder. One version has a flexible mounting and a blind hollow shaft, with bore sizes from 4mm to 10mm, for mounting directly onto motors.

The second type has a normal shaft and servo flange.

Click Here for Series 755 Data Sheet

The 758 has been designed to offer an exact retro-fit replacement for two of the most widely used machine tool encoder types, and is constructed to withstand the demands of seriously hazardous industrial environments. The cover is machined from solid aluminum and has a 6mm wall thickness.

Output circuits include 5/24V RS422 Line Driver and Push-Pull, which will operate to 200 KHz.

A stainless steel bodied version, designed especially for food industry applications, is available as is an extended range of high-resolution options to 30,000PPR.

Click Here for Series 758 Data Sheet

The 760N encoders are configured with a full through hollow shaft (which may be fixed at either end). Standard bore sizes are 10, 12, 14, 15mm and 0.5”. The encoder body is fixed by means of two flexible mountings which compensate for minor shaft misalignment.

Output circuits are available with either 5/24V RS422 Line Driver or 5/24V Push-Pull. This encoder

now provides all signals: A, B, Z, (A, B, Z).

Click Here for Series 760N Data Sheet

The Series 775 features a collet type mounting clamp and an anti-rotation flex mount for quick and easy mounting.

The 775 is available in bore sizes of 14mm, 19mm, 22mm, 28mm, 30mm, and 1.00”, whilst the 776 is available in large bore sizes up to 1.875”.

Electrical features include high voltage line driver (5-24VDC) or Push-Pull, over-voltage protection, and standard 100oC operating temperature. This encoder is fitted with a 2m flying lead.

Click Here for Series 775 / 776 Data Sheet

The 925 provides an absolute version of the industry standard size 25 encoder, and uses a well-proven opto-asic differential reader to generate the absolute codes.

With resolution to 14* bits, in a variety of codes, the encoder has a Push-Pull output circuit, and will operate through the range of 4.75V to 26V.

Click Here for Series 925 Data Sheet

The 926 Series miniature 8 bit absolute encoder has been designed with very compact dimensions and a simple fixing arrangement.

Available in 8 bit (0256) graycode, the 926 is a full thru-bore hollow shaft device, fitted with 2m of cable. The encoder operates from 4.75 - 26V in Push-Pull mode.

Click Here for Series 926 Data Sheet

The 958 G/X/C/B is an absolute version of the 420/426 style 58mm diameter encoder, and has been developed to provide a wide range of codes and count direction/logic polarity.

With resolution to 14* bits in binary, cyclic graycode or excess graycode, and 15 bits in BCD, it features an industry standard Push-Pull output which operates from 4.75 - 26V. A variety of connection methods is available.

Click Here for Series 958 Data Sheet

The 960 Series miniature 9-11 bit absolute encoder has been designed with very compact dimensions and a simple fixing arrangement.

Available in Cyclic or excess graycode, the 960 is a full thru-bore hollow shaft device, fitted with 2m of cable. The encoder operates from 4.75 - 26V in Push-Pull mode and features a user selectable “direction of control!”

Click Here for Series 960 Data Sheet

A range of flexible couplings, mounting brackets and flanges, and measuring wheels to be used in conjunction with our encoder products.