SC5200

• Consistent water quality
• Uniform chemical dosing under varying conditions
• Reduced chemical costs
• Automatic operation of the treatment process
  

Specifications

• Power: 115VAC, 50/60Hz(standard)
  Option: 240VAC, 50Hz (optional)
• Output: 4-20mA Streaming current signal
  4-20mA Process signal (max. 500OHM load)
• Meter Readout: Dual digital display: -100 to +100 Streaming currect units; and process set point.
• Control Functions: Single loop proportional+intergral+derivative(PID) control; Continuous auto tune; Microprocessor based with self diagnostics; Automatic & manual mode selectable
• Communications: RS-485 (optional)
• Accuracy: 1% of full scale
• Response Time: Less than 5 seconds
• Gain Adjustment: Full range
• Zero Adjustement: Full range
• Signal Filter: Adjustable low pass
• Sample Cell: Flow through, external type, Manual jet wash conn.(std)
  Automatic Jet Wash system(opt)
• Sample Flow Rate: STD Probe: 2-4L/min(0.5-1 Gal/min) High Flow Probe: 4-20L/min (1-5Gal/min)
• Sample Flow Sensor: Optional, Consult Product Manager
• Sample Wetted Parts: PVC, Delrin, PTFE & Silver
• Sample Connections: Barb Type 1/2" ID Tube(standard) Barb Type 1" ID tube (High Flow)
• Alarms: Band type: deviation from set point
  Relays: SPDT,2amps at 115/230VAC
• Operating Temp. 32°C to 120°F (0°C to 50°C)
• Enclosure: NEMA 4X, 316SS
• Weight: 24Lbs (10.91Kgs)

SC5200 Data Sheet

SC4200

• Consistent water quality
• Uniform chemical dosing under varying conditions
• Reduced chemical costs
• Reduced manual supervision and/or automatic operation of the treatment process
  

Specifications:

• Power: 115VAC, 50/60Hz(standard)
  Option: 240VAC, 50Hz (optional)
• Output: Two 4-20mA Streaming current signals. 1 fctory calibrated output; 1 customer calibrated output (max. 500OHM load each)
• Meter Readout: Digital: -100 to +100 SC units
• Operating Modes: Calibration and Run mode selectable
• Accuracy: 1% of full scale
• Response Time: Less than 5 seconds
• Gain Adjustment: Full range continuous from 1-10 on front panel; additional internal adjust
• Zero Adjustement: Full range
• Signal Filter: Adjustable low pass
• Sample Cell: Flow through, external type, Manual jet wash conn.(std)
  Automatic Jet Wash system(opt)
• Sample Flow Rate: STD Probe: 2-4L/min(0.5-1 Gal/min) High Flow Probe: 4-20L/min (1-5Gal/min)
• Sample Flow Sensor: Optional, Consult Product Manager
• Sample Wetted Parts: PVC, Delrin, PTFE & Silver
• Sample Connections: Barb Type 1/2" ID Tube(standard) Barb Type 1" ID tube (High Flow)
• Alarms: High & Low adjustable Relays: SPST, 0.4amps at 115VAC
• Operating Temp. 32°C to 120°F (0°C to 50°C)
• Enclosure: NEMA 4X, 316SS
• Weight: 24Lbs (10.91Kgs)
• Remote Display Option: RC7200 Remote Controller Station (accepts 4-20mA signal from SC4200 via 2wire, twisted pair 22AWG)max 3000ft. seperation.

SC4200 Data Sheet