• A pH probe ideally suited for measurement in demineralized water or power generation applications.
• Specially designed and tested for ultra pure water applications
• Easy installation, maintenance and calibration
• Pt100 and 3 meters of cable included

8362 Pure Water pH Probe Data Sheet...Click Here

• pH probes for the food and drink industry, reactors in bio-technology, on-line process measurement etc.
• Biologically safe
• Model 8380 is retractable
• Compact and easy to handle
• All wetted parts are stainless steel
• Mounting on a standard bushing to be welded to pipe or tank

8370 Insertion pH Probe Data Sheet...Click Here
8380 Insertion pH Probe Data Sheet...Click Here

• Electrode cleaning systems are available using a variety of methods according to the nature of the electrode and contaminant.
• The Model 8540 mechanical cleaning system uses a ring-shaped small brush or silicone rubber membrane attached to an up and down moving shaft which is periodically activated by a programmable timer.
• In the air or water cleaning system an IP65 electrovalve, which can be supplied with either air or water, is installed between the transmitter and the electrode or sensor.
• For the chemical cleaning system, a twin-chamber hose pump delivers measured volumes of a cleaning fluid via a nozzle mounted immediately below the tip of the electrode or sensor.

8544 Data Sheet...Click Here

• A two channel transmitter for pH (glass and antimony) and/or redox (metallic) electrodes.
• Measurement of pH and redox and/or temperature
• Differential measurement capability
• Specific software for temperature compensation for high purity
• water and water for power generation

8930 Transmitter Data Sheet...Click Here

• A two-wire, 4 to 20mA single channel transmitter for pH or redox electrodes having a pre-amplifier. A low impedance version is available.
• One-piece electronics for ease of maintenance
• Certified version available for use in hazardous areas
• IP65 protected
• Programming via a UV resistant, touch keypad

8965 Transmitter Data Sheet...Click Here

• A single channel transmitter for glass and antimony pH electrodes, or redox measurement.
• Simple to use with large graphic display and easy programming
• Auto diagnostics - true measurement of electrode impedance
• Wide choice of temperature compensations
• Auto calibration in standard buffers
• 0 to 20mA or 4 to 20mA outputs
• Bi-directional proportional controller - pulse contact or frequency output

9135 Transmitter Data Sheet...Click Here

Pryde Measurement Pty. Ltd.,
ACN 004 560 374
National Customer Service - Free Call: 1800-688-211