Pryde Measurement Pty Ltd - Measurement and Controls
RETURN TO HOME
SC5200
SC4200








SC5200

  • Consistent water quality
  • Uniform chemical dosing under varying conditions
  • Reduced chemical costs
  • Automatic operation of the treatment process

Specifications

  • Power: 115VAC, 50/60Hz(standard)
    Option: 240VAC, 50Hz (optional)
  • Output: 4-20mA Streaming current signal
    4-20mA Process signal (max. 500OHM load)
  • Meter Readout: Dual digital display: -100 to +100 Streaming currect units; and process set point.
  • Control Functions: Single loop proportional+intergral+derivative(PID) control; Continuous auto tune; Microprocessor based with self diagnostics; Automatic & manual mode selectable
  • Communications: RS-485 (optional)
  • Accuracy: 1% of full scale
  • Response Time: Less than 5 seconds
  • Gain Adjustment: Full range
  • Zero Adjustement: Full range
  • Signal Filter: Adjustable low pass
  • Sample Cell: Flow through, external type, Manual jet wash conn.(std)
    Automatic Jet Wash system(opt)
  • Sample Flow Rate: STD Probe: 2-4L/min(0.5-1 Gal/min) High Flow Probe: 4-20L/min (1-5Gal/min)
  • Sample Flow Sensor: Optional, Consult Product Manager
  • Sample Wetted Parts: PVC, Delrin, PTFE & Silver
  • Sample Connections: Barb Type 1/2" ID Tube(standard) Barb Type 1" ID tube (High Flow)
  • Alarms: Band type: deviation from set point
    Relays: SPDT,2amps at 115/230VAC
  • Operating Temp. 32°C to 120°F (0°C to 50°C)
  • Enclosure: NEMA 4X, 316SS
  • Weight: 24Lbs (10.91Kgs)

SC5200 Data Sheet...Click Here


Back to Top








SC4200

  • Consistent water quality
  • Uniform chemical dosing under varying conditions
  • Reduced chemical costs
  • Reduced manual supervision and/or automatic operation of the treatment process

Specifications:

  • Power: 115VAC, 50/60Hz(standard)
    Option: 240VAC, 50Hz (optional)
  • Output: Two 4-20mA Streaming current signals. 1 fctory calibrated output; 1 customer calibrated output (max. 500OHM load each)
  • Meter Readout: Digital: -100 to +100 SC units
  • Operating Modes: Calibration and Run mode selectable
  • Accuracy: 1% of full scale
  • Response Time: Less than 5 seconds
  • Gain Adjustment: Full range continuous from 1-10 on front panel; additional internal adjust
  • Zero Adjustement: Full range
  • Signal Filter: Adjustable low pass
  • Sample Cell: Flow through, external type, Manual jet wash conn.(std)
    Automatic Jet Wash system(opt)
  • Sample Flow Rate: STD Probe: 2-4L/min(0.5-1 Gal/min) High Flow Probe: 4-20L/min (1-5Gal/min)
  • Sample Flow Sensor: Optional, Consult Product Manager
  • Sample Wetted Parts: PVC, Delrin, PTFE & Silver
  • Sample Connections: Barb Type 1/2" ID Tube(standard) Barb Type 1" ID tube (High Flow)
  • Alarms: High & Low adjustable Relays: SPST, 0.4amps at 115VAC
  • Operating Temp. 32°C to 120°F (0°C to 50°C)
  • Enclosure: NEMA 4X, 316SS
  • Weight: 24Lbs (10.91Kgs)
  • Remote Display Option: RC7200 Remote Controller Station (accepts 4-20mA signal from SC4200 via 2wire, twisted pair 22AWG)max 3000ft. seperation.

SC4200 Data Sheet...Click Here


Back to Top






Pryde Measurement Pty. Ltd.,
ACN 004 560 374
National Customer Service - Free Call: 1800-688-211

 

Melbourne
Unit 2, 615 Warrigal Rd,
Ashburton, VIC 3147
Phone: (03) 9567 0777
Fax: (03) 9567 0799
Locked Bag 600,
Ashburton, VIC 3147
Brisbane
51 Yale Circuit
Forest Lake, QLD 4078
Mobile: 0425 863 095
Fax: (03) 9567 0799
Sydney
Unit 6, 79 Williamson Road.
Ingelburn, NSW 2565
Phone: (02) 9618 5822
Fax: (02) 9618 5844
P.O.Box 327,
Ingelburn, NSW 2565