For oxygen or carbon dioxide, for flexible monitoring throughout your plant


This analyser is in the final stages of testing and is scheduled to begin production Early-Mid 2010

Model 3624

Full inline quality control for soft drink production. Know in less than one minute the dissolved carbon dioxide (CO₂), oxygen (O₂), and temperature in the product. Offers real-time analysis. Audible and visual alarms. Internal components are sanitized automatically during normal CIP operation. Up to 1,000 product specifications can be stored in the software.

• Confirm carbon dioxide (CO₂) levels within one minute of initial startup or changeover
• Confirm Brix levels within three minutes
• Reduce product & package wastage

Model 3624 Data Sheet

Model 3650

A unique analyzer that takes care of all your oxygen measurements! Multipurpose, it accurately measures both saturated and trace level (down to 1 ppb!) concentrations of oxygen, in gas as well as in liquid phase. Use it for off-line sampling; for package analysis, with a piercing device; or for calibrating, verifying, and backing up an online system (the sensor is also compatible with all of our in-line instruments).

• Measures to within 1 ppb for trace level accuracy; high sensitivity
  (3655 version measures down to 0.1 ppb)
• Tough NEMA 4X / IP 67 stainless steel construction, built to last.
  
• Very fast first result—typically from saturation to 2 ppb in 3 min.
  (no “warm up” for accurate measurement(
• No sample preparation needed, measures gases in both dissolved and gaseous phases.
  
• No moving parts means little maintenance - typically every 6 months.
  
• Stores up to 500 readings which can be simply downloaded onto a PC for analysis.

Model 3650 Data Sheet

Use with Orbisphere electrochemical (EC) sensors for single channel online oxygen (O₂) or ozone (O₃) measurement. Stainless steel enclosure to IP65. Wall- or panel-mount. Stores 1000 measurements, 1000 last user actions, and last 10 calibrations. Data download via RS-485, USB or Ethernet connections. Touch screen operation with multi-level password protection.

• Accurate O₂ or O₃ measurement
• Robust stainless steel enclosure
• Single channel online instrument

Model 410 Data Sheet

The ORBISPHERE 510 Multi Channel offers multi channel capability for both electrochemical (EC) sensors measuring O₂, O₃ or H₂ and for thermal conductivity (TC) sensors measuring CO₂, N₂, or H₂ .This complete system is designed for process monitoring in liquid or gas phases across a wide range of applications for Beverage, Electronics Life Sciences and Power industries.
Now available for the beverage industry with the ORBISPHERE 510 - Safe Total Package Air Measurement

• Up to 3 sensors using electrochemical (EC) or thermal conductivity (TC) technologies reducing cost of installation and ownership
• High level accuracy, rapid response time and selective gas measurement gives reliable and effective process monitoring
• Thermal cut-off offers a longer life span for all ORBISPHERE sensors during CIP/abnormal high temperature conditions
• Cross-channel compensation that allows highly accurate dissolved gas readings whilst eliminating distortion from secondary gases

Model 510 Data Sheet

The ORBISPHERE 6110 total package analyser is the latest technology in final package analysis for gas measurements. It has been designed to meet the practical needs of the at-line environment and to deliver a simple, high-quality user interface.
This automatic analyser provides oxygen and carbon dioxide values for both headspace and liquid phase in bottles or cans. Automatic operation, self-validation and at-line ergonomics result in an exceptional tool for final product quality control.

• At-line ergonomics – simple, effective,time saving
• Data confidence – protected, audited, validated
• Return on your investment – low total cost of ownership

Model 6110 Data Sheet

The ORBISPHERE A1100 oxygen (O2) sensor is the latest development of the well-known and proven ORBISPHERE Electro-Chemical (EC) sensors.
This sensor is designed for process monitoring as well as laboratory analysis in the liquid or gas phases across a wide range of applications from beer or soft-drinks production to rinsing of semiconductor wafers in chip-manufacturing plants, reactorcoolant systems in nuclear power plants, or any place where oxygen measurement is critical.

• Sensor refurbishment in 3 minutes with pre-filled recharge cartridge* (*patent-pending)
• Unique design allows for extended period between recharges
• Unrivalled accuracy and response time for fast detection of process change

A1100-S00 Data Sheet

Our patented electrochemical sensors are designed to meet the most stringent measurement requirements (accurately measuring down to 5 ppb and up to 200 ppm) as well as harsh plant conditions (such as hot cleaning in place). Install them inline for process control, or in a flow chamber for spot measurement with a portable instrument (3600).

31xxx (for CO₂, N₂, H₂) EC Sensor Data Sheet
311xx (for O₂) EC Sensor Data Sheet

The ORBISPHERE G1100 oxygen (O2) luminescent sensor with the ORBISPHERE 410 offer a new way of monitoring oxygen in high purity water.

• First luminescent sensor for process ppb level oxygen monitoring
• No chemicals, membranes or electrolyte (<5 minutes annual service)
• Fully automatic in-situ calibration

This on-line process analyser is designed for use in power generation plants running oxygenated treatment (OT), all volatile treatment (AVT) chemistry, or other industrial applications requiring effective oxygen monitoring, such as process water in the semiconductor industry.

Model G1100 Data Sheet

OPTICAL SENSOR TECHNOLOGY FOR OXYGEN MONITORING (Power)

The ORBISPHERE K1100 optical sensor together with the ORBISPHERE 410 controller offers a new way of monitoring oxygen in power plants. ORBISPHERE sensors set the industry standards for oxygen measurement by offering “peace of mind” to every water chemistry manager. The new ORBISPHERE K1100 maintains this tradition and offers significant operating and cost benefits.

Model K1100 Luminescent Oxygen Sensor Data Sheet

The ORBISPHERE 410 controller used with the ORBISPHERE M1100 optical sensor offers a new way of monitoring oxygen (O2) in beer and de-aerated water. ORBISPHERE sensors set the industry standards or oxygen (O2) measurement by offering "peace of mind" to every brew-master and quality manager. The 410 controller for the M1100 is also available various Profibus and analog relay output combinations, and in both AC and DC powered

The ORBISPHERE M1100 28 mm optical sensor with the ORBISPHERE 410 controller offers a new way of monitoring oxygen (O2) in beer and de-aerated water. ORBISPHERE sensors set the industry standards or oxygen (O2) measurement by offering "peace of mind" to every brew-master and quality manager.

The new ORBISPHERE M1100 maintains this tradition and offers significant operating and cost benefits.

• Lowest drift, fastest response, and annual calibration - the perfect combination
• Accuracy in ppb oxygen (O2) measurement for effective process control
• Optical technology eliminates membrane and electrolyte to minimize maintenance

Model M1100 Data Sheet

You will note that there are two different models of the beverage sampler: one designed for wine (or still liquids) sampling and the other for beer (or carbonated liquids) sampling.
Both systems require four basic components for measuring gas concentrations of a beverage:

• An indicating instrument (with LCD and controls, delivered separately)
• One or two sensors (made of black plastic or stainless steel)
• One or two flow chambers (for mounting each sensor)
• The model 2997X-A grey beverage package sampler
  
  
  

The calibration solution is prepared in a precision calibration bottle. A known and precise amount of sodium bicarbonate powder is combined with a ready-made dillute citric acid colution to provide a defined accurate carbon dioxide content in liquid.

This solution can then be circulated through the flow chamber of a thermal conductivity sensor to provide accurate calibration of the sensor and associated instrumentation.

Regular calibration ensures confidence in product quality

3231X Calibration Kits Data Sheet