Model-M concentration analyzer was developed for measuring high solid concentrations in liquids. Typical applications are: i. e. at different kinds of product to product changes and CIP cycles; liquid ageing and cell growth in bioreactors. The Model-M is designed to withstand the most demanding process conditions.

Measuring range: max 0...4000 FTU, min 0...1500 FTU (Formazine Turbidity Unit)
Sensitivity: 0.05% from range
Power consumption: 2.5 W, 24 VDC
Temperatures:
- Process 0...100 ºC
- High temp.
- Measuring head 0...150ºC
- Ambient 0...50 ºC
- Output: 4...20 mA
- Standards: CE & 3A hygienic, optional EEx II em T6 for high explosive areas

Optec-M Data Sheet...Click Here

Model-F spectrophotometer is used to analyze very small concentrations, colors or dosing ratios using visible NIR or IR band. Typical applications are e.g. filter controls, alcohol dosings, and color measurements in liquids.

Measuring range: Min 0...5 FTU (Formazine Turbidity Unit)
Sensitivity: 0.05% from range
Power consumption: 2.5 W, 24VDC
Temperatures:
- Process 0...100 ºC
- High temp.
- Measuring head 0...150ºC
- Ambient 0...50 ºC
Output: 4...20 mA
Standards: CE & 3A hygienic, optional EEx II em T6 for high explosive areas

Optec-F Data Sheet...Click Here

Model-R is an on-line process refractometer. It is used to analyze dissolved solids in liquids. The Model-R is ideally suited for the measurement of: acids; caustics; sugars and salts; as well as different dosing processes.

Measuring range:
0...40 Brix
(1,33...1,41 RI)
30...70 Brix
(1,38...1,47 RI)
60...100 Brix
(1,46...1,53 RI)
Sensitivity: 0.005 % from range
Power consumption: 4 W, 24 VDC
Temperature range: 0...150 ºC
Output: 4...20 mA
Standards: CE & 3A hygienic, optional EEx II em T6 for high explosive areas.

Optec-R Data Sheet...Click Here

The very fast and accurate Model-S is an ideal on-line fat analyzer for milks.The Model-S is available for process installations or as a lab version. Typical applications are: milk intake; laboratory use; milk standardization; product silo monitoring; and packing line control.

Measuring range: 0...10 % milk fat
Accuracy: ±0.01%
Sensitivity: ±0.01%
Power consumption 10 W
Power: 110...230 VAC
Temperatures:
- Process 0...100 ºC
- High temp.
- Measuring head 0...150 ºC
- Ambient 0...50 ºC
Output: 4...20 mA
Standards: CE & 3A hygienic

Optec-S Data Sheet...Click Here

Model-COD is designed for on-line COD (Chemical Oxygen Demand) analysis of waste waters. While especially well suited to analyze waste waters in the food and beverage industries, effluents in other industries can be efficiently analyzed as well. The Model-COD exhibits quick response times yet has a small service demand.

Measuring range: 0...150,000 ppm (mg/l)
Power consumption: 2.5 W, 24 VDC
Temperatures:
- Process 0...100 ºC
- High temp.
- Measuring head 0...150 ºC
- Ambient 0...50 ºC
Output: 4...20 mA
Standards: CE, optional EEx II em T6 for high explosive areas.

Optec-COD Data Sheet...Click Here