Pryde Measurement Pty Ltd - Measurement and Controls
RETURN TO HOME

IAMA

  • 3 Way Isolation of Analog Signals
  • Universal conversion Module-Switch Selectable Inputs & Outputs
  • Over 100 Input & Output Analog Conversion Combinations
  • All Ranges are Factory Calibrated Custom Field Calibration is Available
  • 9 to 32 VDC Module Power

IAMA Data Sheet...Click Here



IFMA

  • Simple On-Line range Setting
  • User Settable Full Scale Frequency from 1 Hz to 25 Khz
  • Four Output Ranges (0 to 5 V, 0 to 10 V, 0 to 20 mA, & 4 to 20 mA)
  • Programmable Input Circuit
  • 85 to 250 VAC & 9 to 32 VDC

IFMA Data Sheet...Click Here



IFMR

  • Simple On - Line Trip Freq Setting
  • Trip Frequency from 0.1 Hz - 25 Khz
  • Over / Under, Zero - Speed Detection
  • Relay Latching, Alarm Override, & Alarm Reset Function
  • Hysteresis & Offset Functions
  • 85 to 250 VAC & 9 to 32 VDC

IFMR Data Sheet...Click Here



AAMR

  • Setpoint Analog Alarm Module
  • Selectable Analog Inputs (0 to 10 VDC or 0 to 20 mA)
  • Full Scale Relay Trip Point Adjustments
  • 20 to 30 VDC Module Power
  • Form C Relay Outputs

AAMR Data Sheet...Click Here



PRS / PRA

  • Speed Switch (PRS)
  • Over / Under, Zero - Speed Detection
  • Pulse Rate to Analog Converter (PRA)
  • Delivers Analog Output Proportional to Input Pulse - Rate (Frequency)
  • Dual Signal Output 0 to 10 VDC Plus Selectable Signal Current Output of 0 to 1 mA or 4 to 20 mA
  • Available in 5 Frequency Ranges

PRS Data Sheet...Click Here
PRA Data Sheet...Click Here



APMR

  • 3 Phase Fault Detection
  • Protects Against Phase Loss, Unbalance, Under Voltage, & Phase Reversal
  • Available in 230, 380, or 480 VDC
  • Low Cost
  • DIN Rail Mountable
  • Inrush Under Voltage Delay

APMR Data Sheet...Click Here



VFC /CFC

  • Voltage / Current to Frequency Converter
  • 0 to 10 VDC or 4 to 20 mA Input Units
  • AC or DC Operation
  • Adjustable Zero & Span for Frequency
  • Adjustable Low End cut - Out
  • 3 NPN Open Collector Outputs (10 Khz, 1 Khz, 100 Hz)

VFC/CFC Data Sheet...Click Here



PSDR

  • Signal conditioner 100 mA Power Supply
  • Signal conditioner 650 mA
  • Signal conditioner 1 A Power Supply
  • Input to Output Voltage Isolation
  • Fused Version Available
  • Power Output: 24 VDC

PSDR Data Sheet...Click Here



AVMR

  • Relay Terminal Blocks
  • 2 Layer Double Contact Form A
  • Isolation Between Input & Output
  • Input Voltage of 24 VAC / DC
  • LED to Indicate the Switching Status
  • Damping & Polarity Protection Functions

AVMR Data Sheet...Click Here



GCM

  • Serial Converter Module
  • RS232 to 20 mA
  • RS422 / 485 to 20 mA
  • Isolated 20 mA Serial communications
  • Transmit Disable Allows Operation on a Two - Wire Bus for RS485 Compatibility

GCM 232 Data Sheet...Click Here
GCM 422 Data Sheet...Click Here



ICM4

  • Serial Converter Module (RS232 / RS485)
  • 9 to 32 VDC Power
  • Half Duplex (RS485) & Full Duplex (RS422)
  • LED Indication for RXD, TXD & Power
  • Universal Mounting Foot for DIN Rail Installation

ICM4 Data Sheet...Click Here



DEVICENET GATEWAY

  • Allows Communication Between Devicenet Control Equipment & Products with RS485 Serial Communication
  • Half Duplex (485) & Full duplex (422)
  • RXD, TXD, & Devicenet LED
  • Universal Mounting Foot for DIN Rail



ITMA / IRMA

  • Intelligent Thermocouple Module
  • Intelligent RTD Module
  • 9 to 32 VDC or Loop Powered
  • Simple Adjustable Range Settings
  • Electrical Isolation
  • Sensor Break Detection

ITMA Data Sheet...Click Here
IRMA Data Sheet...Click Here



Pryde Measurement Pty. Ltd.,
ACN 004 560 374
National Customer Service - Free Call: 1800-688-211


Melbourne
Unit 2, 615 Warrigal Rd,
Ashburton, VIC 3147
Phone: (03) 9567 0777
Fax: (03) 9567 0799
Locked Bag 600,
Ashburton, VIC 3147
Brisbane
51 Yale Circuit
Forest Lake, QLD 4078
Mobile: 0425 863 095
Fax: (03) 9567 0799
Sydney
Unit 6, 79 Williamson Road.
Ingelburn, NSW 2565
Phone: (02) 9618 5822
Fax: (02) 9618 5844
P.O.Box 327,
Ingelburn, NSW 2565